Our Newest Limited-Edition Building Supplies

Vetotouch Europa

Vetotouch Europa- Decorative Finish

$65

Vetotouch Europa is a cement-based decorative finish composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar.

14 Days Return

Free Return

Free Shipping

Orders Over $200

Share This :

Description

Uses of Vetotouch Europa

  • External and internal building facades.
  • As a finish coat for EIFS / ETICS systems.
  • On plaster surfaces and concrete surfaces.
  • On overhead surfaces.
  • Decorative European effects: Mexican, Spanish, Antique, and Textured.

 

Advantages of Vetotouch Europa

  • Factory controlled pre-blend ensures
    consistently high quality.
  • Requires only the addition of water on-site at
    the time of usage.
  • Uniform color / mass.
  • Improved workability and curing
  • Easy application with uniform work flow enables
    high productivity and superior finishing.
  • Strong adhesion on a variety of substrates.
  • Internal and external applications.
  • Weather-resistant.
  • UV stable pigment provides resistance to fading
    and eliminates the need for additional paint.
  • Suitable for humid and dry conditions.

 

Standards Compliance

  • BSEN 998 – 1 : CSIII , Wc 1
  • ASTM C926
  • BSEN 13914

Additional information

Appearance

Colored Powder

Wet Density

1.5 Kg/Liter

Pot Life

60 minutes

Compressive Strength BSEN 1015 - 11

> 7 N/mm2
@ 28 Days

Flexural Strength BSEN1015-11

> 2 N/mm2
@ 28 Days

Bond Strength to concrete EN 1015 - 12

> 0.8 N/mm2
@ 28 Days

Thermal Conductivity Coefficient - EN1745, A12

0.9 W/ mK

VOC

<10 gm/L

Surface Preparation

The substrate should be sound, clean, free from loose
material, grease, laitance, dirt curing compound, etc.

Before the Vetotouch Europa application, wet the en-
tire surfaces with clean potable water. The surface

should look damp at the time of the Vetotouch Europa
application.

Mixing

Add to the mixing container 7.5-8.5 liters of water for
each 25kg bag of Vetotouch Europa. Add the powder
to the water and mix with a mechanical plaster mixer or
low-speed heavy-duty electric drill fitted with a suitable

paddle for 3-4 minutes until achieving a uniform, lump-
free consistency. Leave the mixed material to stand for

10min and briefly remix without adding water.
For small batch quantities, mix the material manually
for approx. 1-2 min or when achieving homogeneous
mix.
A manual application is considered (not by spray
machines), optionally, adding 0.5 to 1.0 liter of
Vetobond AB432 to the mixing water and adjusting
the water requirement accordingly for each 25kg bag.
Follow the same mixing procedure as described above.
Use the mixed material within 30-60 minutes. Do not
add water once the mixed mortar starts to harden.

Application

Apply Vetotouch Europa in a single or multiple coats
on smooth (plastered) surfaces by trowel application to
achieve the desired thickness of 1-5mm.

Curing

It is vital to cure Vetotouch Europa surface with clean
potable water 2 times a day for 3 days. During hot
and dry conditions, extend the curing period for a
minimum of 5-7 days. It will help to obtain high physical
properties. An acrylic-based curing compound can be
used.
To protect the final color look, it is recommended
to apply one coat of Saveto Vetoseal product range
(contact the technical department for advice).

Cleaning

Clean tools with water before the mortar hardens. After
the hardening, remove its residuals mechanically only.

Packaging & Coverage

Stated consumption data are for general guidance.
Actual consumption depends on the nature of
substrate, consistency used, method of application,
and wastage.

Shelf Life & Storage

The original sealed bag of Vetotouch Europa has a shelf
life of 12 months, provided it is stored clear of ground
in a dry, shaded place below 35oC.

Health & Safety

Vetotouch Europa is highly alkaline; therefore, avoid
direct contact with eyes or skin. It is recommended to
use protective gloves and goggles during application.
Any skin contact should be wash with soap & water. In
case of eye irritation, immediately wash with a copious
amount of clean cold water. Seek medical advice.
Vetotouch Europa is non-flammable.
For further information, please refer to the product
material safety data sheet.

Additional Information

Saveto manufactures a wide range of construction
chemicals and specialty products for various
applications divided into the following product groups:

  • Waterproofing Systems.
  • Concrete Repairs & Grouts.
  • Flooring Systems.
  • Wall & Facade Systems.
  • Sealants and Joints.
  • Renders & Finishes.
  • Plasters & Masonry.
  • Tile adhesives & Grouts.
  • Primers & Ancillary Products.
  • Thermal Insulation Systems
  • Protective Coatings
  • Accessories.

For further information on these products and systems
kindly check our website or contact your local Saveto
representative.