Our Newest Limited-Edition Building Supplies

Saveto Putty Fine

Saveto Putty Fine

$65

Saveto Putty Fine is a water-based putty. It is supplied as a wet putty in pre-weighed pails ready to use on-site. Saveto Putty Fine is a high-quality product that is used as a thin underlayment to repair undulations. It provides a very smooth surface finish that is ideal for subsequent application of paint & decorative coatings. Generally, Saveto Putty Fine can be applied in thicknesses less than 0.7mm.

14 Days Return

Free Return

Free Shipping

Orders Over $200

Share This :

Description

Uses of Saveto Putty Fine

  • Use for leveling of minor surface undulations.
  • Apply internally in dry conditions onto the walls
    & ceilings.
  • Use on concrete, plastered surfaces that are
    smooth, precast concrete surfaces, and on
    wood.
  • Suitable for use over plastered surfaces with
    Saveto products, gypsum boards, and wood
    surfaces.
  • Suitable for use over Vetonit Putty WR.

 

Advantages of Saveto Putty Fine

  • Ready to use and  easy to apply.
  • It gives a smooth finish by using a putty flat
    trowel.
  • Excellent filling property.
  • High adhesion to the substrate.
  • Toughness increases with time.
  • Very low VOC.
  • Sandable.

Additional information

Appearance

Pale creamy

Finish

Matt, smooth finish

Wet Film Thickness (WFT)

200 – 400 micron

Application Temperature

5oC – 45oC

Full dry time

3 – 4 Hours

Specific Gravity

1.55 – 1.75

Viscosity

120,000 – 180,000 CPS
(Sp#7 @20rpm)

Solid Content

68 – 74 %

pH

8.00 – 9.00

Substrate Preparation

The surface should be sound, clean, free from loose
material, grease, laitance, dirt curing compound, etc.
For previously painted surfaces, remove the old paint
before the application of Saveto Putty Fine.
Allow wet surfaces to dry completely before the putty
application.

Application

Generally, apply Saveto Putty Fine in single or double
coats.
Apply Saveto Putty Fine to the substrate by pressing
the putty firmly. Use a flat trowel to work the mixed
material to a smooth level.
Once the first coat dries, apply a second coat as
necessary.
After applying Saveto Putty Fine, it is recommended
to apply one coat of alkali-resistant primer followed by
two coats of acrylic emulsion paint or other suitable
coatings.

Curing

Saveto Putty Fine is self-curing and does not require
water treatment.

Cleaning

Clean all tools immediately after finishing with water. As
for the hardened materials, clean them mechanically.

Shelf Life & Storage

The original sealed container of Saveto Putty Fine has
a shelf life of 12 months, provided it is stored clear of
ground in a dry, shaded place between 5 oC up to 35oC.

Health & Safety

Avoid Saveto Putty Fine direct contact with eyes or
skin. It is recommended to use protective gloves and
goggles during application. Any skin contact should
be washed with soap & water. In case of eye irritation,
immediately wash with a copious amount of clean cold
water. Seek medical advice.
Saveto Putty Fine is non-flammable.
For further information, please refer to the material
safety data sheet.

Additional Information

Saveto manufactures a wide range of construction
chemicals and specialty products for various
applications divided into the following product groups:

  • Waterproofing.
  • Concrete Repair & Grouts.
  • Flooring Systems.
  • Wall & Facade Systems.
  • Sealants and Joints.
  • Putties & Finishes
  • Plasters & Renders.
  • Tiling Systems
  • Primers & Ancillary Products.
  • Thermal Insulation Systems.
  • Protective Coatings.
  • Accessories

Saveto also provides various technical information
such as CAD details, detailed method statements,
specification clauses, application manuals, product
selectors and technical support both in contractors
and consultants offices as well as construction sites.
For further information on these products and systems
kindly check our website or contact your local Saveto
representative.